Washing machines are a household essential, but like any appliance, they can run into problems overtime. Understanding the most common issues and how to fix them can save you time and costly repairs. We have a few actually the most common washing machine problems in the simple solution fixing them.
Washing machine won’t start
If your washing machine won’t start, check is properly plugged in. Sometimes the problem is as simple as it loose plug. Ensure the power outlet is working by plugging in another appliance. If the outlet works, check the door latch. Washing machines won’t run unless the door is properly closed. Lastly, inspect the circuit breaker or fuse box breaker can prevent the machine from receiving power
How to fix
- Make sure the washing machine is plugged in.
- Ensure the doors closed with the latch.
- Reset the circuit breaker if tripped.
Washing machine won’t drain
When the washing machine doesn’t drain properly, it is usually due to a clogged hose filter. Overtime dirt, lint and small objects can clog these components, causing the water to pull inside the drum. If it is left untreated, this can give you a foul odor in your laundry room and even more mechanical issues.
How to fix
- Check the drain hose for any kinks or clogs.
- Clean the pump filter, usually located near the bottom of the front of the washer.
- Ronnie a cleaning cycle with a washer cleaner to remove the buildup.
Washing machine is shaking violently
A washing machine that shakes or vibrates excessively could be due to the unbalancing load or uneven surface. When heavy items like towels or blankets are on one side of the machine it becomes off-balance. If the washing machine is not on level surface will increase.
How to fix
- Evenly distribute laundry inside the drum.
- Ensure the machine is placed on a surface.
- Adjust the washer to stabilize if needed.
Washing machine won’t spin
If your washer won’t spin, it might be overloaded or the motor could be worn out. Overloading the machine can prevent it from properly spinning the drum. A broken or worn out belt will also stop the drum from rotating.
How to fix
- Remove some clothes to avoid overloading.
- Inspect the drive belt for signs of wear.
- Replace the belt if necessary.
Regular maintenance and troubleshooting can extend the life of your washing machine. By addressing these common problems early, you can avoid expensive repairs or replacements. Basic repairs like cleaning the filter or adjusting the washers load, can fix the issues. However, if the problems continue contact the professional that can fix the small problems to avoid further damage.